CITROEN 2002 BERLINGO - Page 96

ENGINE
93
CHECKING AND SETTING THE VALVE TIMING
Engine : VJX
TOOLS
- Belt tension measuring instrument : 4099-T or 4122-T
- Flywheel locating peg : 4507-T.A.
- Injection pump pulley locating peg : 4527-T. S1 Tool kit 4507-T
- Camshaft pulley locating peg : 4527-T. S2
- Tensioning lever. : 4507-T.J.
- Pinion locking tool : 6016-T.
CHECKING THE VALVE TIMING
- Peg : the flywheel, the injection pump pulley, the camshaft pulley.
SETTING THE VALVE TIMING
- Peg : the flywheel, the injection pump pulley, the camshaft pulley.
- Loosen the tensioner roller, and remove the belt.
ESSENTIAL: Check that the tensioner and guide rollers rotate freely (no stiffness). If not, replace
the roller(s).
- Loosen the screws (1) and (3) (lock the pulley with tool 6016 - T).
- Position pulleys (2) and (4) to the end of the slots (without tightening the screws (1) and (3)).

B1EP07PC