CITROEN 2002 BERLINGO - Page 99

96
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engine : LFX
TOOLS
- Belt tension measuring instrument : 4099-T or 4122-T
- Camshaft pulley locating peg : 7004-T.G.
- Crankshaft locating peg : 7014-T.N. Tool kit 7004-T
- Square drive : 7017-T.W.
CHECKING THE VALVE TIMING
- Remove the protective covers.
- Peg the camshaft pulley at "a" using the tool 7004-T.G.
- Peg the crankshaft at "b" using the tool 7014 - T.N.
SETTING THE VALVE TIMING
- Check that the pegs can be engaged correctly at "a" and "b".
- Fit the belt in the following order : camshaft pulley, crankshaft pinion, water pump pinion, tensioner roller.
- Peg the camshaft pulley at "a" and the crankshaft pinion at "b" .
- Remove the peg at "b" only.
- Bring the tensioner roller (2) into contact with the belt.
B1EP07SC
