220
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engines: 6FZ - RFN
Setting the timing (continued).
A: Pegging on the manual gearbox.
B: Pegging on the automatic gearbox.
Peg:
- The crankshaft, using tool [2].
- The camshaft pulleys (5) and (6), using tool [1].
Remove:
- The screw (3) of the crankshaft pulley (2).
- The lower timing cover (4)
(by moving the engine)
.
IMPERATIVE: Never remove the crankshaft pulley (2) without pegging the crankshaft
and the camshafts.
Slacken the screw (9) of the tensioner roller (8).
Turn the tensioner roller (8)
(clockwise)
.
Remove the timing belt (7).
IMPERATIVE: Systematically replace the following components: timing belt, exhaust
manifold fixing nuts, timing belt tensioner roller nut.
B1BP2V3D B1EP1BBD
XSARA - XSARA PICASSO
To Next Page
Loading...
