II
!
MF
R
ront armrest
You can move the console housing cover
in order to use it as an armrest.
With the engine running , tilt the button
to the position required.
The temperature of the seat is regulated
automatically.
There are two setting positions:
- "HI": High heating
- "LO": Low heating
When the button is in the intermediate
position, the heating is switched off.
The indicator lamps A come on when
the system is activated.
Heated seats adjustment
) To raise it, pull upwards.
) To lower it, push it downwards,
pressing the height adjustment but-
ton at the same time.
) To remove it, raise it to the high
position, then remove it pressing
the height adjustment button at the
same time.
) To refi t it, engage the rods of the
head restraint in the apertures,
pressing the height adjustment but-
ton at the same time.
Head restraint height adjustment
Never drive with the removed head
restraints in the vehicle as they
could be thrown around the vehi-
cle on sharp braking. They must always
be in place and adjusted correctly.
After installing the head restraint,
check that the height adjustment but-
ton has engaged correctly.
The adjustment is correct when the
top of the head restraint is aligned
with the top of the head of the seated
person.
https://www.automotive-manuals.net/
To Next Page
Loading...
