CITROEN C3 2022 - Access; Remote control; Key

22
Access
Remote control / Key
Remote control function
The remote control can be used to perform
the following remote functions (depending on
version):
– Unlocking/Locking/Deadlocking the vehicle.
– Opening the fuel tank cap.
– Remote operation of lighting.
– Activating/Deactivating the alarm.
– Locating the vehicle.
– Activating the vehicle’s electronic immobiliser.
The remote control includes a conventional key
that allows the central unlocking/locking of the
vehicle using the door lock, as well as starting
and switching o󰀨 the engine.
Back-up procedures allow the vehicle to be
locked/unlocked in the event of a failure of the
remote control, the central locking, the battery,
etc. For more information on the Back-up
procedures, refer to the corresponding section.
Built-in key
Using the remote control built-in key, you can
perform the following operations (depending on
version):
– Unlocking/Locking/Deadlocking the vehicle.
– Activation/Deactivation of the manual child
lock.
– Activation/Deactivation of the front passenger
airbag.
– Back-up Unlocking/Locking of the doors.
– Switching on the ignition and starting/switching
o󰀨 the engine.
Without Keyless Entry and Start
► To unfold or fold the key, press the button.
With Keyless Entry and Start
► To eject the key or put it back in place, pull
and hold the button.
Unlocking the vehicle
► Press this button to unlock the vehicle.
When the unlocking button is pressed, the
ashing of the direction indicators for a few
seconds signals:
– The unlocking of the vehicle for versions
without alarm.
– The deactivation of the alarm for other
versions.
Locking the vehicle
Normal locking
► Press this button.
When the locking button is pressed, the lighting
of the direction indicators for a few seconds
signals:
– The locking of the vehicle for versions without
alarm.