46
Lighting and visibility
Exterior lighting control
stalk
Main lighting
Automatic illumination of lamps/daytime
running lamps
Lamps o/daytime running lamps
Sidelamps only
Dipped or main beam headlamps
Headlamp dipping
► Pull the lighting control stalk to switch
between dipped and main beam headlamps.
In lamps o and sidelamps modes, pull the
lighting control stalk to switch the main beam
headlamps on directly ("headlamp ash").
Display
Illumination of the corresponding indicator
lamp on the instrument panel conrms that the
selected lighting is on.
Rear foglamp
It only works if the dipped or main beam
headlamps are on.
► Rotate the ring forwards/backwards to turn
it on/o.
When the lighting is switched o automatically
(with AUTO model), the foglamp and the dipped
beam headlamps will remain on.
Front foglamps and rear
foglamp
► Press and rotate the ring:
– forwards a 1
st
time to switch on the front
foglamps.
– forwards a 2
nd
time to switch on the rear
foglamp.
– backwards a 1
st
time to switch o the rear
foglamp.
– backwards a 2
nd
time to switch o the front
foglamps.
When the lamps are switched o automatically
(with AUTO model) or when the dipped beam
headlamps are switched o manually, the
foglamps and sidelamps remain on.
► Rotate the ring backwards to switch the
foglamps o; the sidelamps will then switch o.
Switching on the foglamps is prohibited
in clear weather or in rain, both day and
night. In these situations, the power of their
beams may dazzle other drivers. They must
only be used in fog or falling snow (rules may
vary depending on country).
Do not forget to switch o the foglamps when
they are no longer necessary.
Switching on the lamps after
switching o the ignition
To reactivate the lighting control, rotate the
ring to the "0" position - lamps o, then to the
desired position.