CITROEN C3 Picasso 2011 - Changing a Wheel

11
1
36
P
RA
C
TI
C
AL INF
O
RMATI
O
N
2. Infl ation
) Turn the selector A to the
"air" position.
) Uncoil the black pipe H fully.
) Connect the black pipe to
the valve of the wheel.
) Connect the compressor's electric
plug to the vehicle's 12 V socket.
) Start the vehicle again and leave the
engine running.
) Adjust the pressure using the com-
pressor (to infl ate: switch B in po-
sition "I" ; to defl ate: switch B in
position "O" and press button C ), in
accordance with the vehicle's tyre
pressure label (located on the left
hand door aperture).
A loss of pressure indicates that the
puncture has not been fully plugged;
contact a CITROËN dealer or quali-
fi ed workshop for assistance.
) Remove and stow the kit.
) Drive at reduced speed (50 mph
[80 km/h] max) limiting the distance
travelled to approximately 120 miles
(200 km).
) Visit a CITROËN dealer or a
qualifi ed workshop as soon
as possible.
You must inform the tech-
nician that you have used
this kit. After inspection, the
technician will inform you
whether the tyre can be re-
paired or must be replaced.