PRACTICAL INFORMATION
Interior lighting
Interior lamps (1/W5W)
Detach the cover of the interior lamp 1
with a thin screwdriver, close to the but-
ton, to access the faulty bulb.
Map reading lamps (2/W5W)
Detach the cover of the interior lamp. To
access the faulty bulb, detach the parti-
tion for the reading lamp 2 concerned,
as necessary.
Footwell lamps (W5W)
Unclip the cover using a thin screw-
driver to access the faulty bulb.
Boot lamps (W5W)
Detach the unit by pushing it rear-
wards.
Torch (Krypton 3.6 V)
Open the tab.
Push with a fl at screwdriver in the
hole under the tab and recover the
bulb unit.
Open the bulb unit fully to change
the bulb.
Exterior mirror lamps (W5W)
Unclip the cover using a thin screw-
driver to access the faulty bulb.
To Next Page
Loading...
