8
Safety
111
C3Picasso_en_Chap08_securite_ed01-2015
The system is reinitialised with the ignition
on and the vehicle stationary, via the vehicle
configuration menu.
F Press the MENU button for access to the
main menu.
F Press the "5" or "6" button to select
the Veh config menu, then confirm by
pressing the OK button.
F Press the "5" or "6" button to select
"Reinit inflat", then confirm by pressing
the OK button.
F Select "yes" or "no" then press OK.
A message is displayed asking you to
confirm the instruction.
F Confirm by pressing the OK button.
F Conform then quit the menu.
F Press the MENU button for access to the
main.
F Press the "5" or "6" button to select the
menu, "Personalisation-configuration"
then confirm by pressing the buttonOK.
F Press the "5" or "6" button to select the
"Define vehicle parameters", menu, then
confirm by pressing the OK button.
The new pressure settings registered are
considered to be reference values by the
system.
Vehicles without audio or
navigation system
Vehicles with audio system
F Press the "5" or "6" button to select
the "Tyre pressures", menu then the
"Reinitialisation" menu, then confirm by
pressing the OK button.
A message confirms the reinitialisation.
To Next Page
Loading...
