10
Checks
141
C3Picasso_en_Chap10_verification_ed01-2015
Bonnet
F Push the exterior safety catch B to the left
and raise the bonnet.
F Unclip the stay C from its housing.
F Fix the stay in the notch to hold the bonnet
open.
Closing
F Take the stay out of the support notch.
F Clip the stay in its housing.
F Lower the bonnet and release it at the end
of its travel.
F Pull on the bonnet to check that it is
secured correctly.
F Open the front left door.
F Pull the interior bonnet release lever A,
located at the bottom of the door aperture.
Opening
The location of the interior bonnet
release lever prevents opening of the
bonnet while the front left door is closed.
Do not open the bonnet in high winds.
When the engine is hot, handle the
exterior safety catch and the bonnet
stay with care (risk of burns).
To Next Page
Loading...
