Practical information
158
C3Picasso_en_Chap11_informations-pratiques_ed01-2015
Removing a wheel
List of operations
F Remove the bolt cover from each of the
wheel bolts using the tool 3 (with alloy
wheels only).
F Fit the security socket 4 to the
wheelbrace 1 to slacken the security bolt
(if your vehicle has them).
F Slacken the other bolts using the
wheelbrace 1 only.
Parking the vehicle
Immobilise the vehicle where it does not
block traffic: the ground must be level,
stable and non-slippery.
Apply the parking brake, switch off the
ignition and engage first gear* to lock
the wheels.
If necessary, place a chock against the
wheel diagonally opposite the wheel to
be changed.
You must ensure that the occupants get
out of the vehicle and wait where they
are safe.
Never go underneath a vehicle
supported by a jack; use an axle stand.
* Position R for an electronic gearbox.
The jack must only be used to change a
wheel with a damaged tyre.
The jack does not require any
maintenance.
To Next Page
Loading...
