Practical information
160
C3Picasso_en_Chap11_informations-pratiques_ed01-2015
List of operations
F Put the wheel in place on the hub.
F Screw in the bolts by hand as far as
possible.
F Pre-tighten the security bolt (if your vehicle
has them) using the wheelbrace 1 fitted
with the security socket 4.
F Pre-tighten the other bolts using the
wheelbrace 1 only.
Fitting a wheel
After changing a wheel
To stow the punctured wheel in the boot
correctly, first remove the central cover.
When using the "space-saver" type
spare wheel, do not exceed 50 mph
(80 km/h).
Have the tightening of the bolts and the
pressure of the spare wheel checked
by a CITROËN dealer or a qualified
workshop without delay.
Have the punctured wheel repaired
and refit it to the vehicle as soon as
possible.
To Next Page
Loading...
