Comfor t
56
C3Picasso_en_Chap03_confort_ed01-2015
Fully-folded position
F Move the corresponding front seat forward
if necessary.
F Put the rear seat in the fully back position.
F Place the head restraints in the low
position.
F Pull control A, to release the seat back
which folds easily onto the seat cushion.
The seat fits into the floor, providing a
continuous level floor.
To put the seat back in position:
F Pull the seat back backwards until it locks
in place.
F Return the seat cushion to the desired
position.
When putting back in position, take care
not to jam the seat belts.
To Next Page
Loading...
