Monitoring
28
Distance recorders
The total and trip distances are displayed for
thirty seconds when the ignition is switched off,
when the driver's door is opened and when the
vehicle is locked or unlocked.
Total distance recorder
It measures the total distance travelled by the
vehicle since its first registration.
Clock
Adjusting the time - Choice of
units
To adjust the time of the clock and choose the
units used by the screen, use the right-hand
button on the instrument panel, carrying out the
operations in the following order:
F press the button for more than two seconds:
the minutes flash,
F press the button to increase the minutes,
F press the button for more than two seconds:
the hours flash,
F press the button to increase the hours,
F press the button for more than two seconds:
24H or 12H is displayed,
F press the button to select 24H or 12H,
F press the button for more than two seconds:
°C or °F is displayed,
F press the button to select °C or °F,
F press the button for more than two seconds
to complete the adjustments.
After approximately 30 seconds without any
action, the screen returns to the normal display.
When travelling abroad, you may
have to change the units of distance:
the display of road speed must be in
the official units (miles or km) for the
country. The change of units is done via
the screen configuration menu, with the
vehicle stationary.
Trip distance recorder
It measures the distance travelled since it was
reset to zero by the driver.
F With the ignition on, press the button until
zeros appear.
To Next Page
Loading...
