176
Practical information
E3_en_Chap09_info_pratiques_ed01-2014
1. Sealing
Repair procedure
Avoid removing any foreign bodies
which have penetrated into the tyre.
F Uncoil the white pipe G fully.
F Unscrew the cap from the white pipe.
F Connect the white pipe to the valve of the
tyre to be repaired.
F Switch off the ignition.
F Turn the selector A to the
"sealant" position.
F Check that the switch B is in
position "O".
F Connect the compressor's electric plug to
the vehicle's 12 V socket.
F Start the vehicle and leave the engine
running.
Take care, this product is harmful (e.g.
ethylene-glycol, colophony...) if swallowed
and causes irritation to the eyes.
Keep this product out of the reach of
children.
Do not start the compressor before
connecting the white pipe to the tyre
valve: the sealant product would be
expelled through the pipe.
To Next Page
Loading...
