184
Practical information
E3_en_Chap09_info_pratiques_ed01-2014
F Place the jack 2 in contact with one of the
two front A or rear B locations provided on
the underbody, whichever is closest to the
wheel to be changed.
F Extend the jack 2 until its base plate is in
contact with the ground. Ensure that the
centreline of the jack base plate is directly
below the location A or B used.
F Raise the vehicle until there is sufficient
space between the wheel and the ground
to admit the spare (not punctured) wheel
easily.
F Remove the bolts and store them in a clean
place.
F Remove the wheel.
To Next Page
Loading...
