190
Practical information
E3_en_Chap09_info_pratiques_ed01-2014
Main beam headlamps
F Remove the protective cover by pulling on
the tab.
F Disconnect the bulb connector (do not
remove the earth connector located below).
F Push on the spring, then move it towards
the middle of the vehicle to release the
bulb.
F Remove the bulb and change it.
Direction indicators
Amber coloured bulbs, such as the
direction indicators, must be replaced
with bulbs of identical specifications
and colour.
Rapid flashing of the direction indicator
warning lamp (right or left) indicates the
failure of a bulb on that side.
F Turn the bulb holder an eighth of a turn
anti-clockwise and extract it.
F Remove the bulb and change it.
To reassemble, carry out these operations in
reverse order.
To reassemble, carry out these operations in
reverse order.
To Next Page
Loading...
