CITROEN c4 picasso 2006 - Page 39

A
A
A
A
40
II
Reset to zero
Your CITROËN technician resets the indicator to zero after each service.
However, if you do your own servicing, the procedure for resetting to zero
is as follows :
- Switch off the ignition, then turn the key to position
S
, steering lock.
- Press on button
A
and keep it pressed.
- Switch on the ignition.
- Keep button
A
pressed down until the screen indicates a zero and the
maintenance spanner disappears.
- Switch off the ignition.
Maintenance intervals
If you use your vehicle in particularly
diffi cult conditions, it is essential to
have recourse refer to the service
schedule for driving in severe con-
ditions, comprising shorter intervals
between ser vices (see the Mainte-
nance Guide).
M A I N T E N A N C E I N D I C A T O R
Mono-tone or
Bi-tone
instrument
panel
NaviDrive
instrument panel