CITROEN c4 picasso 2006 - Page 6

D
A
C
IN BRIEF
I
9
I N T E R I O R
TO FOLD THE SEATS
From outside
- Pull fi rmly upwards on strap
C
,
as indicated by the red arrow,
to unlock the seat ; maintain the
pressure until the seat is fully
folded.
From the boot - whilst
loading, for example
(Grand C4 Picasso)
Having fi rstly folded the third-row
seats.
- Pull on control
D
to unlock the
required seat.
TO RETURN THE SEATS TO
THE UPRIGHT POSITION
Return the rigid plates of the second-
row seats to their initial (upright) posi-
tion and lock them in position (Grand
C4 Picasso).
Raise the backrest and push it back-
wards until it locks in position.
RIGID PLATE
(Grand C4 Picasso)
A rigid plate is attached to each
second-row seat backrest.
To unlock / lock the rigid plate :
- Slide latch
A
of the plate down-
wards, to unlock it.
- Return the plate to the upright
position, then slide latch
A
up-
wards to lock it.
Note :
Before deploying the rigid
plates, check that the second-row
seats are slid as far back as pos-
sible.
Requirements for third-row
passenger seat belts
Take care to attach the third-row
passenger seat belts on the rings
provided for this purpose.
Do not attach the belts on the
anchoring points marked with
a red cross (see illustration
above).
Stowing the tongue of the
third-row seat belt
T h i r d - r o w s e a t s –
G r a n d C 4 P i c a s s o
S e c o n d - r o w s e a t s