122
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engine: RFJ
B1EP1EXC
B1EP1EYC
IMPERATIVE: No exterior pressure or action should be applied on the timing belt.
Peg the inlet camshaft pulley, using tool [1].
Checking.
Timing belt tension.
IMPERATIVE: Check the position of the index «a», it should be opposite the slot «f».
If the position of the index «a» is not correct, repeat the operations to tension the timing belt.
Refitting.
Refit the upper timing cover (1).
Refit the RH engine support.
Remove tool [6].
Clip the fuel supply hose on the timing cover.
Refit the auxiliaries drive belt (see corresponding operation).
Lower the vehicle.
Reconnect the battery (see corresponding operation).
C5
Angl.T3-page032-190-2005 4/02/05 15:15 Page 122
To Next Page
Loading...
