176
ENGINE
Setting the valve timing.
Turn the crankshaft to bring camshaft to its pegging point.
Peg the crankshaft, using tool [2].
Peg the camshaft, using tool [5].
Slacken:
- The three screws (25).
- The screw (23) of the tensioner roller (24).
Remove the timing belt (26).
Checks.
IMPERATIVE: just prior to refitting, carry out the checks below.
Check:
- That the rollers (24) and (27) and the coolant pump (22) are turning freely (without play and without tightness).
- Absence of traces of oil leaks (crankshaft and camshaft sealing rings).
- Absence of leaks of coolant fluid (coolant pump).
NOTE: Replace defective components (if necessary).
CHECKING AND SETTING THE VALVE TIMING
Engine: 4HX
B1EP15AD
B1BP298C
C5
Angl.T3-page032-190-2005 4/02/05 15:15 Page 176
To Next Page
Loading...
