CITROEN C5 2005 - Page 182

178
ENGINE
Setting the valve timing (continued).
Position tool [1] on the belt at «b».
Turn the tensioner roller (24) (anti-clockwise) using tool [2] to attain a tension
of: 106 ± 2 SEEM units.
Tighten screw (23) of the tensioner roller, tighten to 2.5 m.daN.
Remove one screw (25) from the pinion (29) (to check that the screws are not
against the end of the buttonhole).
Tighten the screws (25) to 2 m daN.
Remove tools [1], [2], [3] and [5].
Rotate the crankshaft 8 times
(normal direction of rotation).
Fit the tool [3].
Loosen screws (25).
Fit tool [5].
Loosen screw (23) (to free the tensioner roller (24)).
Fit tool [1].
Turn the tensioner roller (24) (anti-clockwise),using tool [3], to attain a tension
of: 51 ± 3 SEEM units.
Tighten:
- The screw (23) of the tensioner roller (24) to 2,5 ± 0,2 m.daN.
- The screws (25) to 2 ± 0,2 m.daN.
CHECKING AND SETTING THE VALVE TIMING
Engine: 4HX
B1EP15ED
C5
Angl.T3-page032-190-2005 4/02/05 15:15 Page 178