179
ENGINE
Setting the valve timing (continued).
Remove the tool [1].
Refit the tool [1].
Tension value should be: 51 ± 3 SEEM units.
IMPERATIVE: If value is incorrect, restart the operation.
Remove tools [1], [2] and [5].
Rotate the crankshaft 2 times
(normal direction of rotation).
Fit the tool [3].
IMPERATIVE: Should it be impossible to peg the camshaft, check that the
offset between the camshaft pinion hole and the pegging hole is not more
than 1 mm. In the case of an incorrect value, recommence the operation.
Remove the tool [2].
Complete the refitting of components.
CHECKING AND SETTING THE VALVE TIMING
Engine: 4HX
B1EP15ED
C5
Angl.T3-page032-190-2005 4/02/05 15:15 Page 179
To Next Page
Loading...
