CITROEN C6 2005 - Page 118

112
CLUTCH
GEARBOX
TRANSMISSION
PROCEDURE FOR INITIALISATION OF THE AUTOMATIC GEARBOX ECU
NOTE: For all these operations, follow the procedure in the diagnostic tool.
Replacement of the automatic gearbox without replacement of the ECU.
Carry out the following operations:
- Initialisation of the neutral position of the gear selection lever position sensor.
- Initialisation of the adaptation of the oil pressure regulators and electrovalves.
- Initialisation of the autoadaptatives.
- Resetting the oil usage counter to zero.
Replacement of the automatic gearbox ECU.
Carry out the following operations:
- Read the value of the gearbox oil usage counter from the old ECU.
- Write the value of the oil usage counter into the new ECU.
- Initialisation of the neutral position of the gear selection lever position sensor.
- Initialisation of the adaptation of the oil pressure regulators and electrovalves.
- Initialisation of the autoadaptatives.
Angl-C6-page101-120-2005 4/02/05 17:25 Page 112