AXLES
SUSPENSION
STEERING
126
Place the tool [1] on the wheel
fixing bolts.
Measure the wheel radiuses
using tool [2].
Measure, using tool [2].
The front LH height H1M: Measure between the ground and zone A under the front subframe.
The front RH height H2M: Measure between the ground and zone B under the front subframe.
CHECKING AND ADJUSTING VEHICLE HEIGHT
Warning: During measurement of reference heights: Do not switch off the ignition
Measuring the front heightsMeasuring the front wheel radiuses
B3CP0AQD
B3CP0ARD
B3CP0ASD
Reference heights: REFERENCE = Ignition switched on
To Next Page
Loading...
