157
AXLES
SUSPENSION
STEERING
Bleeding.
Connect tool [2] or [3] to the vehicle's diagnostic socket.
Switch on the ignition.
Perform a global test.
Go into the menu:
- Variable damping.
- Bleeding the suspension circuit.
Follow the instructions on the screen.
Apply a pressure of 0.5 bar in the LDS fluid reservoir (using a tool FACOM 920).
Start the engine.
Wait for the vehicle height to stabilise.
Place the vehicle in the high position.
Place the vehicle in the low position.
Move the steering in each direction, from lock to lock.
Stop the engine.
Check the LDS fluid level.
B3FP7HGD
DRAINING, FILLING AND BLEEDING THE HYDRAULIC SUSPENSION/STEERING CIRCUIT
To Next Page
Loading...
