CITROEN C6 2005 - Page 172

166
AXLES
SUSPENSION
STEERING
Attach the tool [3a].
Do up:
- The union [5] on the pipe (2).
- The union [4] on the steering assistance pump.
Connect the assembly [3] to the unions [4] and [5].
Tighten all the unions.
Remove the tool [2].
Open the tap [3e].
Start the engine and allow it to run for 5 seconds.
Stop the engine.
Move the steering several times in each direction.
Check that there are no leaks.
Checking the steering assistance pump pressure.
Start the engine.
Close the tap [3e] for 5 seconds.
Open the tap [3e].
Accelerate between 1200 and 1500 rpm, the pressure should be : 115 ± 5 bars.
Stop the engine.
If the steering assistance pump pressure is correct, check the sealing of the valve.
B1BP3GQD
B1BP3GRD
CHECKING THE STEERING ASSISTANCE PRESSURE (ES9A ENGINE)
Angl-C6-page121-169-2005 4/02/05 17:31 Page 166