CITROEN C6 2005 - Page 41

35
ENGINE
ENGINE TIGHTENING TORQUES
Cylinder block
11 Coolant pump 0,9 ± 0,2
Con rod screws
12
Pre-tightening 2 ± 0,1
Angular pre-tightening 45 ± 5°
Angular tightening 45 ± 5°
Starter gearwheel carrier
13
Pre-tightening 5 ± 0,5
Angular pre-tightening 45 ± 5°
Angular tightening 45 ± 5°
14 Lower engine block screw (*) 0,9 ± 0,2
15 Lower engine block screw (*) 2,3 ± 0,3
Bearing cap fixing screws (*)
16
Pre-tightening 6 ± 0,6
Tightening 14,5 ± 1,4
Angular tightening 90 ± 20°
Crankshaft bearing cap cover
17
Pre-tightening 1,5 ± 0,1
Tightening 3,3 ± 0,9
Angular tightening 47 ± 20°
18 Accessories drive pulley 2,5 ± 0,2
(*) Respect the sequence of tightening.
Engine: DT17BTED4
B1DP1M3P
Angl-C6-page022-82-2005 4/02/05 17:19 Page 35