36
ENGINE
ENGINE TIGHTENING TORQUES
Engine: DT17BTED4
Order of tightening for screws (14) and (15)
(14) Lower engine block screw (screw M6)
(15) Lower engine block screw (screw M8)
Method of tightening:
- Tighten the 10 screws (15) (from 1 to 10) to : 2,3 ± 0,3
- Tighten the 8 screws (14) (from 1 to 18) to : 0,9 ± 0,1
Order of tightening for screws (16) and (17)
(16) Bearing cap fixing screw (screw M9)
(17) Crankshaft bearing cap cover screw (screw M6)
Method of tightening:
- Pre-tighten the 16 screws (16) (from 1 to 16) to : 6 ± 0,6
- Pre-tighten the 8 screws (17) (from 17 to 24) to : 1,5 ± 0,1
- Pre-tighten the 16 screws (16) (from 1 to 16) to : 14,5 ± 2
- Tighten the screws (16) (from 1 to 16) : 90° ± 20°
- Tighten the 8 screws (17) (from 17 to 24) to : 3,3 ± 0,3
- Tighten the screws (17) (from 17 to 24) : 47° ± 20°
B1DP1M4D
B1DP1M5D
To Next Page
Loading...
