56
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engine: ES9A
Tighten the nut (23) of the tensioner roller (24), tighten to 1 ± 0,1 m.daN.
Check that the exhaust camshaft pulley screws are not at the end of slots (by loosening one screw).
WARNING: Otherwise, restart the operation for positioning the timing belt.
Tighten at least 2 screws per exhaust camshaft pulley to 1 ± 0,1 m.daN.
Remove the tools [1], [2] and [4].
Rotate the crankshaft 2 turns in a clockwise direction.
IMPERATIVE: Never turn it back.
Peg the crankshaft, using tool [2].
Peg the camshaft pulleys, using tool [1].
Slacken the nut (23) of the tensioner roller (24).
B1EP15WC
B1EP15XC
To Next Page
Loading...
