CITROEN C6 2005 - Page 69

63
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engine: DT17BTED4
Position the camshaft pegging holes "c" and "e" at "d" and "f", 30° ± 5° in front of the pegging
holes "h" and "g".
NOTE: Turn the crankshaft in the normal direction of rotation, by means of the crankshaft pinion
screw.
Remove the plug from the pegging hole on the cylinder block.
NOTE: Turn the engine by means of the crankshaft pinion screw to bring it to the pegging position
(following the arrow).
Peg the crankshaft using the tool [2].
NOTE: Removing the particle filter and catalytic converter flexible pipe assembly facilitates the
removal of the plug from the pegging hole and the positioning of tool [2].
B1EP1JED
B1DP1MOC
Angl-C6-page022-82-2005 4/02/05 17:19 Page 63