CHANGING THE WIPER BLADES
If you have to replace them, the wiper blades have to be parked in the
. For this, switch off the
ignition and then within one minute move the wiper control stalk. The wipers stand up in a vertical position.
move the wiper control stalk
so that the wipers resume their normal
this action places the Piloted Defl ector in the maintenance position. See “Piloted Defl ector”.
To operate the windscreen wash, pull the wiper stalk towards you.
The screen wash is accompanied by a timed wipe of the windscreen, the
headlamp wash also activates if the dipped beams are on.
The display of a message indicates that there is only approx. one litre of
screen wash fl uid remaining.
In freezing conditions, always check that the wiper blades are free to
Remove any accumulation of snow at the base of the windscreen.
To Next Page
Loading...
