CITROEN CX Series - Page 352

'[7
'L3
"[3
0
r-,
C'7
Ca.
4
OPERATION
N° MA. 530-0
:
(./rki,,
'/ cleclncal
crnpoents
4.
Checking starter pinion
(4)
in
the free position
With the solenoid (3) mounted on
starter, the
starter pinion (4) is normally
in free
position.
Measure
the distance
«
d
»
between
the f lange
of the
starter nose at » b
»
in
the bore of the
motor housing
and the extremity of
the starter
pinion.
This reading should egual
ci 30.5
mm maxi
If
not,
recondition the starter.
Connect
the
inductor supply wre
(7).
Refit
plastic
plug (5.)
(see
page
3).
PDF compression, OCR, web-optimization with CVISION's PdfCompressor