Citronic CEQ215 User Manual

Graphic Equalizers
CEQ215 170.923
CEQ231 170.926
User Manual
Features:
 Switchable Bypass per channel
 Switchable Low Cut filter per channel
 Independent Gain controls
 ±12dB adjustment per band
 Balanced or unbalanced signal path
 LED VU display per channel
www.citronic.com

Citronic CEQ215 Specifications

General

Type	Graphic Equalizer
Channels	2
Frequency Bands	15 per channel
Frequency Range	20Hz - 20kHz
Signal to Noise Ratio	>95dB
Boost/Cut Range	±12dB
Low Cut Filter	40Hz
Input Connectors	XLR and 1/4" TRS
Output Connectors	XLR and 1/4" TRS
Power Consumption	15W
Input Impedance	10k Ohms
Output Impedance	600 Ohms
EQ Bands	25Hz, 40Hz, 63Hz, 100Hz, 160Hz, 250Hz, 400Hz, 630Hz, 1kHz, 1.6kHz, 2.5kHz, 4kHz, 6.3kHz, 10kHz, 16kHz

Summary

Introduction and Safety

Safety and Warnings

Essential safety instructions, warnings, and precautions for operating the unit.

Operation Environment

Guidelines for unit placement, environmental conditions, and cleaning procedures.

Front Panel Overview

Front Panel Controls and Indicators

Detailed identification of all controls and indicators located on the front panel.

Rear Panel and Connections

Rear Panel Connectors

Identification and purpose of all input and output jacks, XLRs, and the IEC mains inlet.

Connection Configurations

Explains the two primary ways to connect the equalizer for mono or stereo operation.

Connection Procedure

Step-by-step advice for connecting equipment, including volume control and power sequencing.

Understanding Equalization

What is Equalization?

Explanation of equalization principles, frequency ranges, and its use in audio.

Operation and Specifications

Operating the Equalizer

Instructions on how to adjust frequency sliders and gain controls for optimal sound.

Technical Specifications

Detailed technical data including power, impedance, frequency response, and dimensions.

Troubleshooting Guide

Common issues and their solutions, covering power, audio output, and signal levels.