Claas AXION 810 C.I.S. User Manual

-
Only move one hand when both feet are supported.
-
Only move one foot when gripping with both hands.
- Close the door (Depending on equipment fit).
Do not exit the tractor by jumping.
6.1.4 Tractor state
5748
Maintaining the tractor in the best possible condition, by carrying out all routine maintenance (oil changes, level
checks, overhauls, adjustments and thorough cleaning) will allow it to be used in the safest and most profitable
way.
Check the following items first:
- High temperature components:
-
Check that airborne particles such as straw, grass,
wood chips etc., do not accumulate in high
temperature areas.
-
Clear debris from around the engine and the exhaust
system.
-
For tools attached to the front or the side of the
tractor, inspect and clean the areas around the
attachments for the various supports.
- Brakes:
-
Check that the brakes work properly.
-
Check the operation of the hand brake and foot
brake.
-
Check that the front axle of the tractor is engaged
when the brakes are actuated (service brakes or
handbrake) (For tractors with 4 wheel drive).
- Steering:
-
Check the operation of the hydrostatic steering.
001hsn27
- Transmission:
-
Check the transmission fluid level (especially if
external services are used).
- Hydraulic system:
-
Check the condition of the system (unions, pipes,
hoses), particularly the hoses to the steering
actuators.
- Electrical system:
-
Check the condition of the electrical system
(batteries, wiring, headlights, indicator lights, hazard
lights, rotating beacons, windscreen wipers, etc.).
- Lighting - indicators:
-
All lighting and indicating equipment must not only
be in working order, but must be fully visible; clean
them.
-
Carry a spare set of bulbs.
-
Replace any defective element.
001hsn28
A. 10 AXION 850-810 C.I.S. - 02/2012 - en

Claas AXION 810 C.I.S. Specifications

General

Brand	Claas
Model	AXION 810 C.I.S.
Category	Tractor
Language	English