Nitrogen Generator NiGen GC Nigen MICRO
3
1.
Introduction
This document is intended for users of nitrogen generator models NiGen GC and
NiGen MICRO, and provides all information regarding installation, use , mainte-
nance and guarantee.
The generator is intended to be used as a source of nitrogen gas for laboratory
applications, including gas chromatography, thermal analysis, ELSD, LCMS, sam-
ple preparation, etc.
The manual covers the following models:
As regards installation and maintenance, it is assumed that the user is familiar
with pneumatic circuit components, and in particular is aware of the safety as-
pects of compressed air and nitrogen.
The margin of the text contains the following symbols, indicating:
m
compulsory safety standards to be observed
c
electrical hazard
e
recommendations and important information
It is strongly recommended to carefully read all safety warnings (
par. 2.1.
) be-
fore carrying out any operation on the generator.
Serial number Model
422.02.0110 NiGen GC
422.02.0220 NiGen GC HC 115 V AC
422.02.0230 NiGen GC HC 230 V AC
422.02.0510 NiGen MICRO
To Next Page
Loading...