04
• The environment should be kept dry and ventilated when using the light.
The unit should never be exposed to water and moisture. Take heed
when operating outdoors in precipitation.
• Don't stick metal pointy things into the unit.
• Don't attempt to modify the unit yourself. If it becomes damaged please
contact your vendor or take it to an authorized repair service. Do not
disassemble this equipment. Touching the product’s internals could result
in injury. In the event of malfunction, the product should be repaired only
by a qualified technician.
• Make sure you only use accessories of the proper voltage.
• Don't let children play with the unit. Keep the light out of reach from
children.
• Serious damage may occur by using near people or animals' eyes. That
can cause. Please do not directly look at the illuminated light.
• Should smoke come from the unit, disconnect the power immediately
and place it in a safe location. It is normal for the fixture to become warm
when working.
• Don't use the light near flammable liquids or vapors, like gasoline.
• If you are packing the light, please triple check that it is turned off.
• After using the light for extended periods, allow it to cool before storing,
to avoid damage to the electronic components.
• Don't use the light to support any other equipment or lift your imaging
device by the unit.
• Please use the soft dry cloth to clean the light. If necessary, carefully wash
with a cloth dampened with neutral detergents, and then dry with a soft
cloth.
• Best not to mount this unit vertically on a camera hot shoe. Use prudence
and attach to a support with the stand adapter.
Safety Warnings
To Next Page
Loading...