1. LED Display
When the display values are in blue numbers, the LED display shows
the brightness of the light ranging from 10 (10%) to 99 (99%). When the
indicator is orange, the LED display shows the color temperature of the
light ranging from 32 (3200˚K) to 56 (5600˚K).
Brightness: 10-99
Channel Address Values: 00-99
Color Temperature: 32-56
Power off the light: off
2. Status Indicator
When red LED indicator is on, it shows the brightness value.
When yellow LED indicator is on, it shows color temperature value.
When both LED indicators are off, it shows remote channel address.
When LED indicator flickers, it indicates low battery status.
3.Transmitting Indicator
When there is data transmitted, the green LED indicator flickers.
4. Power Switch
To power off the light: Press the power switch and hold for more than
1 second.
To power on the light: Briefly press the power switch.
The channel address values are displayed after powering on. It is
possible to control all lighting units despite the specific channel
assigned to each light, by using the universal value 00.
When the remote channel value is set to 1-99, only those units with the
same values work for remote functions.
07
To Next Page
Loading...