Clarion ARX5371R User Manual

m@ TROUBLESHOOTING
Cause |
Power does not turn on. Fuse is blown. Replace with a fuse of the same amperage as the old fuse.
{or
no
sound
is
produced.)
|
Connections
are
improper.
|
Read
the
attached
"installation/wire
connection
guide"once
again
and
wire
prperty.
Measure
Sound quality is poor.
Use a cleaning tape, etc. to clean the head.
Turn the unit off, first.
Remove ali connecting wires from the power ANT lead, and
turn the unit on, then re-connect a wire one by one to the
power ANT lead.
When sound is muted again, check the unit with a wire con-
nected last.
Playback head is dirty.
Power ANT lead is shorted
to the ground.
No sound while unit can
be operated.
This unit is equipped with a number of self-diagnosis functions to protect the system. if a problem should be occur, the user
is warned throurh various error displays. Eliminate the problem using the procedures shown below.
Error display _ Procedure
This indicates that a problem has occured with the CD changer's mechanism (disc cannot be
changed or.ejected, etc. ) -
~The CD changer mechanism is likely damaged.
fers
This
indicates
that
the
pickup
is
out
of
focus
during
playback
due
to
scratches
on
the
disc,
etc.
Er6 This indicates that the CD's TOC (table of contents) cannot be read, for example because the
selected disc is upside-down.
This is displayed if a cassette tape gets stuck during loading or ejecting.
Remove the cause for which the cassette tape got stuck.
if a display other than one of the displays avobe appears, press the reset button. -
-3- ARX5370R

Clarion ARX5371R Specifications

General

Brand	Clarion
Model	ARX5371R
Category	Cassette Player
Language	English