Service Manual
NISSAN MOTOR Genuine
6-disc CD/MP3/WMA Autochanger
AM/FM Radio Stereo
Model
Published by Service Dept.
298-6297-00 Nov. 2005 X
Printed in P.R.C.
(Genuine No. 28185 CL70A)
Clarion Co., Ltd.
50 Kamitoda, Toda-shi, Saitama 335-8511 Japan
Service Dept.: 5-66 Azuma, Kitamoto-shi, Saitama 364-0007 Japan
Tel: +81-48-541-2335/2432 FAX: +81-48-541-2703
PN-2708N-A/B
-1-
SPECIFICATIONS
Tuner section
Tuning system: PLL synthesizer
Receive frequency: AM 530kHz to 1710kHz
FM 87.75MHz to 107.9MHz
Intermediate frequency: AM 450+3/-3kHz
FM 10.7+0.3/-0.3MHz
Quieting sensitivity: AM Less than 38dBu
FM Less than 15dBu
Separation: FM 22+5/-7dB(1kHz)
S/N ratio: AM More than 45dB
FM More than 50dB
Auto stop sensitivity(DX): AM 42+6/-6dBu(600kHz)
39+6/-6dBu
(1000kHz, 1400kHz)
FM 32+6/-6dBu
CD changer section
Separation: More than 60dB(20kHz LPF)
S/N ratio: More than 74dB
Distortion: Less than 0.1%(20kHz LPF)
AUX(CD) section
Separation: More than 52dB(1kHz, 3.0V input)
S/N ratio: More than 80dB(1kHz, 3.0V input)
CMRR: More than 40dB(1kHz, 3.0V input)
General section
Load impedance: 300 ohm/4ch
Power output: 6V x 4
Power supply voltage: DC 14.4V
Back up current: Less than 0.5mA(at 13.2V)
Dimensions(mm): 180(W) x 106.4(H) x 167(D)
MP3/WMA operations:
MP3; Sampling rate 11.025kHz-48kHz
Bit rate: 8kbps-320kbps/VBR
WMA; Bit rate; 48kbps-192kbps/VBR
Logical format(File system);
ISO9660 level 1, 2 or JOLIET or Romeo
Weight: 2.75kg
PN-2708N-A/B
NOTE
* There are two models with a different production place.
China production: PN-2708N-A
Philippines production: PN-2708N-B
All the same parts are used and assemble these models.
* This product includes technology owned by Microsoft Corporation
and cannot be used or distributed without a license from MSLGP.
* We cannot supply PWB with component parts in principle. When
a circuit on PWB has failure, please repair it by component parts
base. Parts which are not mentioned in service manual are not
supplied.
* Specification and design are subject to change without notice for
further improvement.
* In case that the main unit is transported for repair, the lock pin
(966-0653-21) must be set to fix the mechanism assy.
LOCK PIN
966-0653-21