CLEANSING TIMER (T-TIMER)
For even and thorough cleansing of your face, the PLUS features
a proprietary T-TIMER that beeps and pauses momentarily during
your cleansing cycle, to indicate it is time to move to another part
of your face. We recommend the one-minute factory default setting:
20 seconds on your forehead, 20 seconds on your nose/chin, and
10 seconds on each cheek.
T-TIMER settings for facial cleansing are indicated by different audible
sequences. To change the setting, press and hold the on/off button for 2 seconds.
To change to a different setting, release the on/off button, then press twice and hold.
T-TIMER settings for facial cleansing
Audible indication Cleansing duration T-TIMER beeps
1 long beep & 2 short beeps 2 minutes at 40, 80, 100 seconds
1 long beep only 2 minutes none
1 long beep & 1 short beep 1 minute at 20, 40, 50 seconds
(factory default setting)
10
sec
20
sec
20
sec