Clark C25 D - Specifications; Model and Load Capacity; Engine and Cooling System Specs

8-2 C15-35, C15C-32C
C15-35, C15C-32C
CLARK products and specifications are subject to improvements and
changes without notice or obligation.
Model Designation - Rated Load Capacity
Note: Rated capacity applies when using standard upright and standard
forks. [C15-20s(C) :3085mm, C20-30(C):3300mm, C32C:3225mm,
C35:3165mm MFH]
Engine
Specifications for EPA Tier4 engine (C15-20sC,C15-20s)
C15 1360kg @600mm load center [3000lbs@24in] [1500kg@500mm]
C18 1590kg @600mm load center [3500lbs@24in] [1800kg@500mm]
C20s 1810kg @600mm load center [4000lbs@24in] [2000kg@500mm]
C20 1810kg @600mm load center [4000lbs@24in] [2000kg@500mm]
C25 2270kg @600mm load center [5000lbs@24in] [2500kg@500mm]
C30 2720kg @600mm load center [6000lbs@24in] [3000kg@500mm]
C35 3175kg @600mm load center [7000lbs@24in] [3500kg@500mm]
C15C 1360kg @600mm load center [3000lbs@24in] [1500kg@500mm]
C18C 1590kg @600mm load center [3500lbs@24in] [1800kg@500mm]
C20sC1810kg @600mm load center [4000lbs@24in] [2000kg@500mm]
C20C 1810kg @600mm load center [4000lbs@24in] [2000kg@500mm]
C25C 2270kg @600mm load center [5000lbs@24in] [2500kg@500mm]
C30C 2720kg @600mm load center [6000lbs@24in] [3000kg@500mm]
C32C 2950kg @600mm load center [6500lbs@24in] [3200kg@500mm]
Diesel LPG LPG
(Tier4) (Tier4) (Tier4)
Model : Yanmar
4TNV88
PSI
4G63
HMC
Theta 2.4
Cylinders : 4 4 4
Displacement
cubic inches : 133 122 143
liters : 2.2 2.0 2.3
Idle RPM : 800 800 750
Governed RPM
High idle : 2600 2650 2800
Rated RPM : 2400 2650 2600
Rated kW : 29.5 36.8 37.6