C15-35, C15C-32C 8-5
Section 8. Specifications
Fill Capacities
(fluid volumes-liters, quarts, gallons,kilogram,pound)
Engine Coolant Recommendation
Use a mixture of 50% ethylene glycol permanent-type anti-freeze
containing rust and corrosion inhibitor only.
Note: This mixture provides anti-freeze protection level of -37°C
(-34°F), approximately.
Transmission Fluid Recommendation
Use CLARK Specification MS-276A CLARK Part number 2776236.
Hydraulic Fluid Recommendation
Use CLARK Specification MS-68 CLARK Part number 2776239
Hydraulic Oil, with anti-wear additives, or equivalent only.
Cooling
system
Eng.oil,w/
filter
Transaxle
Hydraulic
sump
Fuel tank
C15-20sD 6.0L [6.3Q] 5.8L[6.1Q] 15.0L[15.8Q] 34L[9.0G] 42.0L[44.4Q]
C20-25D 9.6L [10.1Q] 7.5L[7.9Q] 18.5L[19.5Q] 40L[10.6G] 46.1L[48.7Q]
C30-35D 9.6L [10.1Q] 7.5L[7.9Q] 18.5L[19.5Q] 44L[11.6G] 51.9L[54.8Q]
C15-20sL 6.0L [6.3Q] 4.8L[5.1Q] 15.0L[15.8Q] 34L[9.0G] 15kg[33 lb]
C20-25L 8.5L [9.0Q] 4.8L[5.1Q] 18.5L[19.5Q] 40L[10.6G] 15kg[33 lb]
C30-35L 8.5L [9.0Q] 4.8L[5.1Q] 18.5L[19.5Q] 44L[11.6G] 15kg[33 lb]
C20-25G 8.5L [9.0Q] 4.8L[5.1Q] 18.5L[19.5Q] 40L[10.6G] 46.1L[48.7Q]
C30-35G 8.5L [9.0Q] 4.8L[5.1Q] 18.5L[19.5Q] 44L[11.6G] 51.9L[54.8Q]
C15-20sCL6.0L [6.3Q] 4.8L[5.1Q] 15.0L[15.8Q] 24L[6.3G] 15kg[33 lb]
C20-32CL 10.5L[11.1Q] 4.8L[5.1Q] 18.5L[19.5Q] 37L[9.8G] 15kg[33 lb]
To Next Page
Loading...
