Clarke American Sanders Super 7R Edger User Manual

Part No. LT068500 3/14
This book has important information for the use and safe operation of this machine. Failure to read
this book prior to operating or attempting any service or maintenance procedure to your Clarke
American Sanders machine could result in injury to you or to other personnel; damage to the
machine or to other property could occur as well. You must have training in the operation of this
machine before using it. If your operator(s) cannot read this manual, have it explained fully before
attempting to operate this machine.
All directions given in this book are as seen from the operator’s position at the rear of the ma-
chine.
Super 7R Edger
English (2 - 11)
Español (12 - 21)
Français (22 - 31)
ES
EN
FR
Operator’s Manual / Manual del operador / Manuel de l’utilisateur
Models: 07013A, 07125A, 07098A
READ THIS BOOK
LEA ESTE MANUAL
LISEZ CE MANUEL
SUPER7R.indd 1 3/16/14 6:36 PM

Clarke American Sanders Super 7R Edger Specifications

General

Brand	Clarke American Sanders
Model	Super 7R Edger
Category	Sander
Language	English

Summary

OPERATOR SAFETY INSTRUCTIONS

General Power Tool Safety Warnings

Read all safety warnings and instructions to avoid electric shock, fire, and serious injury.

Work area safety

Keep work area clean, well-lit, and free from flammable materials. Keep bystanders away.

Electrical safety

Proper grounding, avoid wet conditions, and do not abuse power cords to prevent shock.

Personal safety

Stay alert, wear protective equipment, prevent unintentional starting, and dress properly.

Power tool use and care

Proper use, maintenance, and storage of power tools to ensure safe operation and longevity.

Safety Warnings For Sanding Operations

Specific safety precautions for operating sanding operations to prevent injury.

Kickback and Related Warnings

Understanding and preventing kickback, a sudden reaction to a snagged rotating accessory.

Additional Rules For Safe Operation

Further safety guidelines for operation, maintenance, and electrical connections.

KNOW YOUR MACHINE

Machine Components Identification

Identifies key parts of the machine using numbered labels for reference.

Machine Specifications

Details technical specifications for different models of the machine.

SANDING CUTS AND SANDPAPER

Initial Cut

Process for removing old finish and imperfections using coarse abrasive.

Final Cuts

Process for removing scratches using fine abrasive for finishing.

MACHINE SET-UP

Preparing Remote Vacuum Dust Collection Systems

Steps to connect a remote vacuum system with 2" or 1.5" hose.

Preparing to use the included dust bag

Instructions for attaching and using the machine's dust bag.

Preparing the Machine for Operation

Final steps before operating, including familiarization and abrasive mounting.

ADJUSTMENT PROCEDURES

Leveling

Procedure to adjust the machine for proper pad contact with the surface.

ROUTINE MAINTENANCE

Carbon Brushes

Inspection and replacement of carbon brushes for motor maintenance.

Dust Bag

Instructions for cleaning and maintaining the dust collection bag.

Bearings

Recommendations for inspecting and replacing bearings for reliable performance.

Lubrication

Guidance on gearbox lubrication intervals and procedures.

MAINTENANCE

To Change The Lubricant In The Gearbox

Step-by-step guide to changing the lubricant in the machine's gearbox.

Parts Manual

Lower Assembly

Diagram and parts list for the lower assembly of the machine.

Upper Assembly

Diagram and parts list for the upper assembly of the machine.

Limited Warranty

Warranty Coverage Details

Details parts and labor coverage periods for different machine components.

Warranty Exclusions and Limitations

Lists conditions not covered by warranty and disclaimers.