Clas Ohlson Plasma Ball - User Manual

English
UNITED KINGDOM • customer service tel: 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston upon Thames, Surrey, KT1 1JZ
1 2 3
Ver. 20190329
Plasma Ball
Art.no 36-7651
Please read theentire instruction manual before using theproduct
and then save it for future reference. Wereserve theright for
any errors in text or images and any necessary changes made
to technicaldata. Intheevent of technical problems or other
queries, please contact our Customer Services.
Safety
• The product is designed for decorative purposes only and is
not suitable as alight source for aroom.
• The darker thesurroundings, themore dramatic thelight
effect willbe.
• It is completely normal for theball to make alow buzzing
noise duringuse.
Product description
Instructions for use
Slide theselector switch to thedesired setting:
• [ ON ]: The light beams will dance around theinside
of theglobe. Placeyour fingers against theglass and
thebeams will move towardsthem.
• [ AUDIO ] (Sound-responsive mode): The light beams will
move in time with thesurrounding sounds such as thebeat
of yourmusic.
• [ OFF ]: The voltage is disconnected.
Care and maintenance
Unplug themains adapter from thewall socket before wiping
theproduct clean with adrycloth.
Troubleshooting guide
No light. • Make sure that themains lead is undamaged
and is securely connected to both
theelectrical socket and thedevice.
• Is thewall socket energised?
• Check that thepower switch is set to [ ON ].
Responsible disposal
This product is intended for indoor useonly.
• Neither theproduct nor its mains adapter may be
dismantled or modified in anyway.
• Before you use theproduct ensure that you check it,
especially theglass, for signs of damage or cracks.
• Never use theproduct or themains adapter if it is in any
way damaged or malfunctioning.
• Repairs must only be carried out by qualified service
technicians and only using genuine spareparts.
• The product must only be connected to theincluded mains
adapter or anadapter with thesame specification.
• Do not place theproduct where it could fall into water or
other liquid.
• Never subject theproduct to impacts or shocks.
• The product can cause interference and interfere with
theoperation of electrical equipment in thevicinity.
• Long-term contact on aspecific point can cause theglass
to gethot.
• Do not cover theproduct.
• The product is not atoy. Keepit out of reach of children
under theage of12.
• The product is made of glass and should be handled withcare.
1. [ OFF/ON/AUDIO ]
2. Mains adapter connection
3. Mains adapter
Installation
1. Unpack theplasma ball carefully and stand it on afirm,
flatsurface.
2. Connect themains adapter to theplasma ball and then to
awall socket.
This symbol indicates that theproduct should not
be disposed of with general householdwaste.
Thisapplies throughout theentireEU. Inorder
to prevent any harm to theenvironment or
health hazards caused by incorrect waste
disposal, theproduct must be handed in for
recycling so that thematerial can be disposed
of in aresponsible manner. Whenrecycling your
product, take it to your local collection facility
or contact theplace of purchase. Theywill
ensure that theproduct is disposed of in
anenvironmentally sound manner.
Specifications
Mains adapter Input 100–240 V AC, 50/60 Hz
Output 12 V DC, 500 mA
Dimensions 24.2×15×15 cm

Clas Ohlson Plasma Ball Specifications