13
HYDRO
SOD CUTTER
ITEM PART NO. DESCRIPTION QTY
ITEM PART NO. DESCRIPTION QTY
1 C500133 BOLT, 5/16-18 x 1 6
2 C500001 GREASE FITTING, 1/4 x 28 6
3 C500101 NUT, 5/16-18 6
4 C500115 WASHER, 5/16 LOCK 6
5 C100003 BEARING 6
6 C100001 WASHER, 3/4 NYLON 12
7 C100002 SEAL 12
8 C100007 GRIP, RUBBER 2
9 C100016 BLADE, 18" CUTTING 1
10 C800002 ARM, BLADE 2
11 C500006 WASHER, 1/2 LCOK 4
12 C500007 NUT, 1/2 HANDLE 1
13 C500034 WASHER, 1/2 FLAT 5
14 C500088 WASHER, 1/4" FLAT 1
15 C500106 NUT, 1/2-13 4
16 C500131 NUT, 1/2-13 LOCK 2
17 C500241 BOLT, 1/2-13 x 1 2
18 C500249 BOLT, FINE THREADED 2
19 C500152 BOTL, 1/2-13 X 2-3/4 2
20 C600001 STEEL SLEEVE 4
21 C400411 ARM, ECCENTRIC ENHANCED 2
22 C400444 WING NUT, DEPTH GAUGE 1
23 C200004 BOLT ,PITCH ADJUSTMENT 1
24 C200005 BOLT, HEIGHT ADJUSTMENT 1
25 C300039 PLATE, DEPTH GAUGE 1
26 C400001 BAR, HIEGHT ADJUSTMENT 1
27 C400238 PITCH ADJUSTMENT BAR 1
28 C100626 WASHER, PLASTIC 1/4" ENHCD 4
29 C100625 BEARING, ENHANCED 2
30 C400412 WASHER, STEEL ENHANCED 2
31 C500272 WASHER, 1/2" EXT. TOOTH LOCK 2
32 C500137 WASHER, 1/4 LOCK 1
33 C500296 BOLT, 1/4 x 2-1/2 CARRIAGE 1
34 C500068 NUT, 1/4-20 NYLOC 1
35 C100507 DECAL. EU 2
* NOT ILLUSTRATED
CUTTER ASSEMBLY
FIGURE 3
To Next Page
Loading...
