CLAUSING 16VT-1 SERIES

Need help?

Do you have a question about the CLAUSING 16VT-1 SERIES and is the answer not in the manual?

Summary

Safety Rules for Power Tools

Know Your Power Tool

Learn tool application, limitations, and specific hazards.

Ground All Tools

Ensure tools with three-prong plugs are properly grounded.

Keep Guards in Place

Ensure all guards are in place and in working order.

Remove Adjusting Keys and Wrenches

Form the habit of removing tools before turning on the machine.

Keep Work Area Clean

Avoid Dangerous Environment

Dont Force Tool

Use Right Tool

Wear Proper Apparel

Avoid loose clothing or jewelry that can get caught in moving parts.

Use Safety Glasses

Always wear safety glasses; use face/dust masks if needed.

Secure Work

Clamp or vise work when practical for safety and free hands.

Maintain Tools in Top Condition

Keep tools sharp, clean, and properly lubricated.

Disconnect Tools

Avoid Accidental Starting

Ensure the switch is OFF before plugging in the power cord.

Use Recommended Accessories

Drill Press Operations

Leveling the Drill Press

Raising Head and Table

Lubrication Guide

Details on lubricating quill, column, feed shaft, and handwheel cam.

Adjusting Spindle Return Spring

Adjusting Spindle End Play

Adjusting Depth Stop

Operational Adjustments and Maintenance

Changing Spindle Speeds

Adjust spindle speeds using the handwheel control while the motor runs.

Replacing Variable Speed Belt

Procedure for replacing the belt, including tension adjustment.

Quill Take-Up Adjustment

Removing and Replacing Chuck

Method for removing the chuck and importance of cleaning tapers.

Multiple Spindle Head Positioning and Column Bracket Parts