To Next Page
M
Martha CruzJul 31, 2025
Why is my CleanMaster Rexx 120 100-600-120 not picking up solution properly?
- NNicole LaneJul 31, 2025
If your CleanMaster Floor Machine isn't picking up solution effectively, it might be due to several reasons. First, check if the recovery tank drain valve is open and close it. Another cause may be a defective recovery tank lid gasket, which would need replacement. A clogged float shut-off screen can also cause this issue; remove the recovery tank lid and clean the screen. Also, ensure that the vacuum hose connections are secure by fastening the cuffs to the hose, and inspect the vacuum hose itself for defects, replacing it if necessary.
General