22
Attaching the Round Brush Nozzle/Bent Nozzle
1. Place the round brush nozzle or the bent noz-
zle directly onto the device or onto the adapter
hose. Make sure that the attachment is seated
fi rmly in place.
2. Alternatively, the long nozzle can be used as a
kind of adapter between the device/extension
hose and the round brush nozzle/bent nozzle
(see picture).
3. When you want to remove the attachments,
simply pull the attachments off the device, the
extension hose or the long nozzle.
Attaching the Cleaning Cloth
1. The cleaning cloth is pulled over the wide nozzle. Make sure that the cloth is fi tted cor-
rectly.
2. When you want to remove the cleaning cloth, simply pull it off the wide nozzle. Be careful
when removing the cleaning cloth as it gets hot during use!
Attaching the Window Squeegee
1. Insert the hooks on the bottom end of the squeegee into the
mounts which are provided for them on the bottom end of
the wide nozzle.
2. Fold down the wide nozzle so that the nozzle attachment can
engage on the front hook of the squeegee.
3. To detach the window squeegee, pull the front hook back and unhook the wide nozzle.
To Next Page
Loading...
