Cleanware HT-E Installation Quick Guide

2 pages

To Next Page

INSTALLATION

QUICK GUIDE

HT-E

Hold for 2 minutes.

Mantenga durante 2 minutos.

Maintenez pendant 2 minutes.

For the HT-E English Manual:

1.888.800.5672

07610-004-66-14-B

= caustic chemicals

químicos cáusticos

produits chimiques caustiques

= ground wire

cable a tierra

l de terre

= verify

vericar

vérier

= use ngers/hands

utilizar los dedos/manos

utiliser les doigts/mains

= use eyes

utiliza tus ojos

utilisez les yeux

= reference data plate

mire la placa de datos

plaque signalétique de référence

= water

agua

eau

= risk of electric shock

riesgo de electrocución

risque de choc électrique

= not supplied

no se suministra

non fourni

= on

encendido

marche

= o󰀨

apagado

arrêt

07610-004-66-14-B

set

For Technical Support:

Pour le manuel de Français HT-E:

Other manuals for Cleanware HT-E

Installation, Operation And Service Manual36 pages

Questions and Answers:

S
Sierra MeyersAug 16, 2025
How to fix Cleanware HT-E Dishwasher if the power light is not illuminating?
- R
  richardjohnsonAug 16, 2025
  If the Cleanware Dishwasher's power light isn't on, first check if the power disconnect is set to "OFF" and flip it to "ON". If that doesn't work, the power disconnect, fuses, power light, or power button might be damaged, requiring assistance from a qualified service agency.
R
reillybrianAug 19, 2025
What to do if my Cleanware Dishwasher is not filling with water?
- M
  michaelriveraAug 19, 2025
  If your Cleanware Dishwasher isn't filling, check if the water inlet interceptor shutter is down and open it. Ensure the standpipe is correctly seated in the drain. Inspect and clean the inlet solenoid valve filter and the inlet hose filter. If these steps don't resolve the issue, the inlet solenoid valve coil may be disconnected or the PCB may be faulty, requiring replacement or professional assistance.

Cleanware HT-E Specifications

General

Brand	Cleanware
Model	HT-E
Category	Dishwasher
Language	English